Tested & Approved NSE5_FMG-7.0 Study Materials Download Free Updated 82 Questions
Regular Free Updates NSE5_FMG-7.0 Dumps Real Exam Questions Test Engine
The NSE5_FMG-7.0 certification exam is a comprehensive test that covers a wide range of topics related to FortiManager 7.0. NSE5_FMG-7.0 exam is divided into several sections, including deployment, administration, configuration, and troubleshooting. Candidates are required to demonstrate their knowledge and skills in managing, configuring, and troubleshooting FortiManager 7.0, as well as their ability to integrate it with other Fortinet security solutions.
Fortinet NSE5_FMG-7.0 certification exam is an essential credential for IT professionals who work with Fortinet’s FortiManager 7.0 platform. It validates the candidate’s knowledge and skills in configuring and managing FortiManager in a network security environment. Passing the exam demonstrates that the candidate has a deep understanding of the platform and is capable of effectively managing and troubleshooting it in a real-world setting.
Fortinet NSE5_FMG-7.0 certification is highly valued by employers as it demonstrates that the holder has a deep understanding of Fortinet security solutions and is capable of managing and configuring complex security environments. Holding this certification can lead to career advancement opportunities and higher salaries.
NEW QUESTION # 35
View the following exhibit.
If both FortiManager and FortiGate are behind the NAT devices, what are the two expected results? (Choose two.)
- A. FortiGate is discovered by FortiManager through the FortiGate NATed IP address.
- B. FortiGate can announce itself to FortiManager only if the FortiManager IP address is configured on FortiGate under central management.
- C. If the FCFM tunnel is torn down, FortiManager will try to re-establish the FGFM tunnel.
- D. During discovery, the FortiManager NATed IP address is not set by default on FortiGate.
Answer: A,D
Explanation:
Fortimanager can discover FortiGate through a NATed FortiGate IP address. If a FortiManager NATed IP address is configured on FortiGate, then FortiGate can announce itself to FortiManager. FortiManager will not attempt to re-establish the FGFM tunnel to the FortiGate NATed IP address, if the FGFM tunnel is interrupted. Just like it was in the NATed FortiManager scenario, the FortiManager NATed IP address in this scenario is not configured under FortiGate central management configuration.
NEW QUESTION # 36
Refer to the exhibit.
Given the configuration shown in the exhibit, how did FortiManager handle the service category named General?
- A. FortiManager ignored the firewall service category General but created a new service category in its database.
- B. FortiManager ignored the firewall service category General and did not update Its database with the value
- C. FortiManager ignored the firewall service category General and updated the FortiGate duplicate value in the FortiGate database.
- D. FortiManager ignored the firewall service category general and deleted the duplicate value In Its database
Answer: C
NEW QUESTION # 37
Refer to the exhibit.
An administrator has created a firewall address object, Training which is used in the Local-FortiGate policy package.
When the installation operation is performed, which IP/Netmask will be installed on the Local-FortiGate, for the Training firewall address object?
- A. 10.200.1.0/24
- B. It will create a firewall address group on Local-FortiGate with 192.168.0.1/24 and 10.0.1.0/24 object values.
- C. 192.168.0.1/24
- D. Local-FortiGate will automatically choose an IP/Netmask based on its network interface settings.
Answer: C
NEW QUESTION # 38
Refer to the exhibit.
Which two statements about an ADOM set in Normal mode on FortiManager are true? (Choose two.)
- A. FortiManager automatically installs the configuration difference in revisions on the managed FortiGate
- B. It supports the FortiManager script feature
- C. It allows making configuration changes for managed devices on FortiManager panes
- D. You cannot assign the same ADOM to multiple administrators
Answer: B,C
Explanation:
"FortiGate units in the ADOM will query their own configuration every 5 seconds. If there has been a configuration change, the FortiGate unit will send a diff revision on the change to the FortiManager using the FGFM protocol."
NEW QUESTION # 39
An administrator wants to delete an address object that is currently referenced in a firewall policy.
What can the administrator expect to happen?
- A. FortiManager will disable the status of the referenced firewall policy
- B. FortiManager will not allow the administrator to delete a referenced address object
- C. FortiManager will replace the deleted address object with the none address object in the referenced
firewall policy - D. FortiManager will replace the deleted address object with all address object in the referenced firewall policy
Answer: C
NEW QUESTION # 40
When an installation is performed from FortiManager, what is the recovery logic used between FortiManager and FortiGate for an FGFM tunnel?
- A. After 15 minutes, FortiGate will unset all CLI commands that were part of the installation that caused the tunnel to go down.
- B. FortiManager will not push the CLI commands as a part of the installation that will cause the tunnel to go down.
- C. FortiGate will reject the CLI commands that will cause the tunnel to go down.
- D. FortiManager will revert and install a previous configuration revision on the managed FortiGate.
Answer: D
Explanation:
The configuration change will break the fgfm connection, causing the FortiGate unit to attempt to reconnect for 900 seconds. If the FortiGate cannot reconnect, it will rollback to its previous configuration.
NEW QUESTION # 41
What does a policy package status of Conflict indicate?
- A. The policy package reports inconsistencies and conflicts during a Policy Consistency Check.
- B. The policy package configuration has been changed on both FortiManager and the managed device
independently. - C. The policy package does not have a FortiGate as the installation target.
- D. The policy configuration has never been imported after a device was registered on FortiManager.
Answer: B
NEW QUESTION # 42
Refer to the exhibit.
Which statement about the object named ALL is true?
- A. FortiManager updated the object ALL using the FortiGate value in its database.
- B. FortiManager installed the object ALL with the updated value.
- C. FortiManager updated the object ALL using the FortiManager value in its database.
- D. FortiManager created the object ALL as a unique entity in its database, which can be only used by this
managed FortiGate.
Answer: A
NEW QUESTION # 43
Refer to the exhibit.
You are using the Quick Install option to install configuration changes on the managed FortiGate.
Which two statements correctly describe the result? (Choose two.)
- A. It will not create a new revision in the revision history
- B. It provides the option to preview configuration changes prior to installing them
- C. It installs device-level changes to FortiGate without launching the Install Wizard
- D. It cannot be canceled once initiated and changes will be installed on the managed device
Answer: C,D
Explanation:
FortiManager_6.4_Study_Guide-Online - page 164
The Install Config option allows you to perform a quick installation of device-level settings without launching the Install Wizard. When you use this option, you cannot preview the changes prior to committing. Administrator should be certain of the changes before using this install option, because the install can't be cancelled after the process is initiated.
NEW QUESTION # 44
View the following exhibit.
Given the configurations shown in the exhibit, what can you conclude from the installation targets in the Install On column?
- A. The Install On column value represents successful installation on the managed devices
- B. Policy seq#3 will be installed on the Trainer[NAT] VDOM only
- C. Policy seq#3 will be not installed on any managed device
- D. Policy seq#3 will be installed on all managed devices and VDOMs that are listed under Installation Targets
Answer: D
NEW QUESTION # 45
View the following exhibit.
Which one of the following statements is true regarding the object named ALL?
- A. FortiManager updated the object ALL using FortiManager's value in its database
- B. FortiManager updated the object ALL using FortiGate's value in its database
- C. FortiManager installed the object ALL with the updated value.
- D. FortiManager created the object ALL as a unique entity in its database, which can be only used by this managed FortiGate.
Answer: B
NEW QUESTION # 46
View the following exhibit.
If both FortiManager and FortiGate are behind the NAT devices, what are the two expected results? (Choose two.)
- A. FortiGate can announce itself to FortiManager only if the FortiManager IP address is configured on
FortiGate under central management. - B. FortiGate is discovered by FortiManager through the FortiGate NATed IP address.
- C. If the FCFM tunnel is torn down, FortiManager will try to re-establish the FGFM tunnel.
- D. During discovery, the FortiManager NATed IP address is not set by default on FortiGate.
Answer: B,D
Explanation:
Fortimanager can discover FortiGate through a NATed FortiGate IP address. If a FortiManager NATed IP address is configured on FortiGate, then FortiGate can announce itself to FortiManager. FortiManager will not attempt to re-establish the FGFM tunnel to the FortiGate NATed IP address, if the FGFM tunnel is interrupted. Just like it was in the NATed FortiManager scenario, the FortiManager NATed IP address in this scenario is not configured under FortiGate central management configuration.
NEW QUESTION # 47
View the following exhibit.
Which of the following statements are true based on this configuration setting? (Choose two.)
- A. This setting will enable the ADOMs feature on FortiManager.
- B. This setting is applied globally to all ADOMs.
- C. This setting will allow automatic updates to the policy package configuration for a managed device.
- D. This setting will allow assigning different VDOMs from the same FortiGate to different ADOMs.
Answer: B,D
NEW QUESTION # 48
What does a policy package status of Modified indicate?
- A. The policy package was never imported after a device was registered on FortiManager
- B. The Policy package configuration has been changed on FortiManager and changes have not yet been installed on the managed device.
- C. FortiManager is unable to determine the policy package status
- D. The Policy configuration has been changed on a managed device and changes have not yet been imported into FortiManager
Answer: B
NEW QUESTION # 49
Which of the following statements are true regarding VPN Gateway configuration in VPN Manager? (Choose two.)
- A. Managed gateways are devices managed by FortiManager in the same ADOM
- B. Managed devices in other ADOMs must be treated as external gateways
- C. External gateways are third-party VPN gateway devices only
- D. Protected subnets are the subnets behind the device that you don't want to allow access to over the IPsec
VPN
Answer: A,B
NEW QUESTION # 50
An administrator would like to create an SD-WAN using central management. What steps does the
administrator need to perform to create an SD-WAN using central management?
- A. Enable SD-WAN central management in the ADOM, add member interfaces, create a static route and SDWAN firewall policies.
- B. Remove all the interface references such as routes or policies
- C. First create an SD-WAN firewall policy, add member interfaces to the SD-WAN template and create a static route
- D. You must specify a gateway address when you create a default static route
Answer: A
NEW QUESTION # 51
Refer to the exhibit.
An administrator logs into the FortiManager GUI and sees the panes shown in the exhibit.
Which two reasons can explain why the FortiAnalyzer feature panes do not appear? (Choose two.)
- A. The administrator IP address is not a part of the trusted hosts configured on FortiManager interfaces.
- B. The administrator profile does not have full access privileges like the Super_User profile.
- C. FortiAnalyzer features are not enabled on FortiManager.
- D. The administrator logged in using the unsecure protocol HTTP, so the view is restricted.
Answer: B,C
NEW QUESTION # 52
......
Pass Fortinet NSE5_FMG-7.0 Exam in First Attempt Easily: https://pass4sure.testvalid.com/NSE5_FMG-7.0-valid-exam-test.html