[Sep 15, 2025] Pass AVIXA Communications CTS-D Exam With 152 Questions
Ultimate Guide to Prepare Free AVIXA CTS-D Exam Questions and Answer
AVIXA CTS-D Exam Certification Details:
| Non-Member Exam Price | $575(USD) |
| Exam Code | CTS-D |
| Duration | 180 mins |
| Number of Questions | 135 |
| Sample Questions | AVIXA CTS-D Sample Questions |
AVIXA CTS-D - Design Exam Syllabus Topics:
| Topic | Weight |
|---|---|
| Duty A: Conducting a Needs Assessment | 16.8% |
| Task 1: Identify Decision-makers and Stakeholders | 1.6% |
| Task 2: Identify Skill Level of End Users | 2.4% |
| Task 3: Educate AV Clients | 1.6% |
| Task 4: Review Client Technology Master Plan | 3.2% |
| Task 5: Identify Client Expectations | 4% |
| Task 6: Identify Scope of Work | 4% |
| Duty B:Coordinating with Other Professionals to Develop Project Documentation | 23.2% |
| Task 1: Review A/E (architectural and engineering) drawings | 4% |
| Task 2: Coordinate with architectural/interior design professionals | 4% |
| Task 3: Coordinate with Mechanical Professionals | 1.6% |
| Task 4: Coordinate with Structural Professionals | 1.6% |
| Task 5: Coordinate with Electrical Professionals | 3.2% |
| Task 6: Coordinate with lighting professionals | 2.4% |
| Task 7: Coordinate with IT and network security professionals | 4.0% |
| Task 8: Coordinate with acoustical professionals | 1.6% |
NEW QUESTION # 67
Two 6500 lumen projectors are being installed for a dual projection system. Each projector draws 1050 watts. What is the expected Btu output of both projectors?
Response:
- A. 7161 Btu
- B. 3581 Btu
- C. 60 Btu
- D. 4300 Btu
Answer: A
NEW QUESTION # 68
In a converged network, where 70 percent of the bandwidth capacity is available and 30 percent of the available capacity is available for streaming, what percentage of the network's rated capacity is available for streaming?
Response:
- A. 30 percent
- B. 70 percent
- C. 50 percent
- D. 21 percent
Answer: D
NEW QUESTION # 69
What systems should be included when drawing AV network diagrams?
Response:
- A. The connected devices, cabling system, wireless links
- B. Signal control, audio auditing, laser conduit
- C. Lighting and projection, noise synching, ambient noise reduction
- D. Sprinkler system, ceiling plan, touch panel, plumbing runs
Answer: A
NEW QUESTION # 70
A(n) __________ microphone picks up sound uniformly from all directions.
Response:
- A. Bidirectional
- B. Hypercardioid
- C. Cardioid
- D. Omnidirectional
Answer: D
NEW QUESTION # 71
The total length of a measurement from a U.S. customary scaled drawing of 1/8 inch is 3.5 inches. What is the length of the real object?
Response:
- A. 25 feet
- B. 28 feet
- C. 35 feet
- D. 18 feet
Answer: B
NEW QUESTION # 72
Under what circumstance would a designer need to generate a Request for Information (RFI) form on a project?
Response:
- A. The general contractor has changed the project schedule and timeline
- B. There is a mis-match between a diagram and a description on the project
- C. The owner has approved a change in types of flat panel displays
- D. There is a site issue having to do with the concrete footers
Answer: B
NEW QUESTION # 73
Which of the following best describes "latency" in AV signal processing?
- A. The signal strength
- B. The delay between input and output of a signal
- C. The power consumption
- D. The cable length
Answer: B
NEW QUESTION # 74
What does the term "gain before feedback" refer to in audio system design?
- A. The difference between input and output signal strength
- B. The increase in amplifier power over time
- C. The maximum amplification before the system produces feedback noise
- D. The maximum volume before distortion occurs
Answer: C
NEW QUESTION # 75
Two types of meters typically used for signal monitoring are __________ and __________.
Response:
- A. VU, PPM
- B. VU, AES
- C. EBU, SMPTE
- D. dBU, PPM
Answer: A
NEW QUESTION # 76
A conference room requires video conferencing and AV presentation capabilities. Which of the following design elements are defined by the architectural dimensions and orientation of the room?
Response:
- A. Display brightness
- B. Display size
- C. Display type
- D. Display aspect ratio
Answer: B
NEW QUESTION # 77
During the __ phase of design the AV designer needs to help the architect address such issues as mechanical and electrical equipment placements, as well as sightline issues affecting ceiling heights.
Response:
- A. System commissioning
- B. Design development
- C. Program
- D. Diagnostic
Answer: B
NEW QUESTION # 78
Which of the following is a common power rating unit used for AV equipment?
- A. Ohms (#)
- B. Volts (V)
- C. Watts (W)
- D. Amperes (A)
Answer: C
NEW QUESTION # 79
For a flat-floor auditorium with rows of staggered seats, evenly spaced for proper horizontal viewing, which row or rows will determine the preferred minimum height of the bottom of the image on a display at the front of the room?
[Collaborating With Other Professionals/Coordinate architectural/interior design criteria] Response:
- A. Ends of the back row of the room
- B. Rear three rows of the room
- C. Second row from the back of the room
- D. First three front rows of the room
Answer: B
NEW QUESTION # 80
In videowall design, __________ is the process of adjusting for the edges of multiple projected images.
Response:
- A. Pixel mapping
- B. Processing
- C. Blending
- D. Orienting
Answer: C
NEW QUESTION # 81
Which cross points would need to be enabled in order to bridge audio and video conferencing?
Response:
- A. Input A output A, Input B output B
- B. Input 8 output C, Input 8 output D
- C. Input C output C, Input C output D
- D. Input B output A, Input A output B
Answer: D
NEW QUESTION # 82
What is the required bandwidth for 4:2:2 progressive digital video (1920 × 1080, 8 bits at 60 Hz)?
Response:
- A. 1.99 Gbps
- B. 1 Gbps
- C. 3.24 Gbps
- D. 100 Mbps
Answer: A
NEW QUESTION # 83
Which factor is most important when selecting a display for a bright conference room?
- A. Screen size only
- B. Speaker quality
- C. Brightness (measured in nits)
- D. Contrast ratio
Answer: C
NEW QUESTION # 84
Which of the following best describes a "touch panel" in AV systems?
- A. An audio mixer
- B. A display device for users to control AV systems interactively
- C. A microphone type
- D. A cable type
Answer: B
NEW QUESTION # 85
How do you confirm the AV System has been built and delivered as per the client's scope?
Response:
- A. Training has been completed with end users along with turnover of O&M Manuals.
- B. Confirm with the client or owner that warranty documentation has been received.
- C. Compare the As-Built drawings and commissioning report to the performance specifications.
- D. Generate an RFI to the architect or general contractor.
Answer: C
NEW QUESTION # 86
If you have a projector that is 2500 ANSI lumens on a 5.5 m2 standard matte white screen, what should be the limits of the task lighting? Note that the projector specification is derated by 25 percent.
Response:
- A. 120 to 175 lux
- B. 527 to 632 lux
- C. 515 to 1001 lux
- D. 113.6 to 1022.7 lux
Answer: D
NEW QUESTION # 87
A matte white screen surface has a gain of _____.
Response:
- A. 0.5
- B. 1.25
- C. 1.0
- D. 0.75
Answer: C
NEW QUESTION # 88
Which wireless frequency band is commonly used for video transmission in AV systems?
- A. 60 MHz
- B. 700 MHz
- C. 2.4 GHz and 5 GHz
- D. 900 MHz
Answer: C
NEW QUESTION # 89
To transport audio using AVB/TSN, you must have at least __________ Ethernet.
Response:
- A. 10 Gbps
- B. 1 Gbps
- C. 100 Mbps
- D. 10 Mbps
Answer: C
NEW QUESTION # 90
......
Pass CTS-D Tests Engine pdf - All Free Dumps: https://pass4sure.testvalid.com/CTS-D-valid-exam-test.html