NSE7_OTS-6.4 Exam Questions Dumps, Selling Fortinet Products
NSE7_OTS-6.4 Cert Guide PDF 100% Cover Real Exam Questions
The Fortinet NSE7_OTS-6.4 certification is highly valued in the IT industry, as it demonstrates the candidate's expertise in OT security and their ability to work with Fortinet products and services. The certification is suitable for professionals who are involved in the design, implementation, and management of OT security solutions, including security engineers, consultants, and architects. By earning this certification, candidates can enhance their career prospects and increase their earning potential in the highly competitive IT industry.
The Fortinet NSE7_OTS-6.4 exam is a vendor-neutral certification exam that is recognized by industry professionals and organizations. The certification demonstrates the candidate's ability to secure OT systems and their knowledge of industry regulations and standards related to OT security. The certification is also recognized by employers and can help candidates to advance their careers in the field of OT security.
What is the salary of an Fortinet NSE7_OTS-6.4 certified professional?
The Average salary of different countries of Fortinet NSE7_OTS-6.4 Exam Certified professional
- Germany €75,000
- Canada CA$95,000
- United States $85,000
- United Kingdom £70,000
NEW QUESTION # 22
Refer to the exhibit.
Which statement about the interfaces shown in the exhibit is true?
- A. port2, port2-vlan10, and port2-vlan1 are part of the software switch interface.
- B. port1-vlan10 and port2-vlan10 are part of the same broadcast domain
- C. The VLAN ID of port1-vlan1 can be changed to the VLAN ID 10.
- D. port1, port1-vlan10, and port1-vlan1 are in different broadcast domains
Answer: D
NEW QUESTION # 23
You are investigating a series of incidents that occurred in the OT network over past 24 hours in FortiSIEM.
Which three FortiSIEM options can you use to investigate these incidents? (Choose three.)
- A. Risk
- B. Overview
- C. Security
- D. List
- E. IPS
Answer: A,B,D
NEW QUESTION # 24
An OT supervisor has configured LDAP and FSSO for the authentication. The goal is that all the users be authenticated against passive authentication first and, if passive authentication is not successful, then users should be challenged with active authentication.
What should the OT supervisor do to achieve this on FortiGate?
- A. Configure a firewall policy with FSSO users and place it on the top of list of firewall policies.
- B. Configure a firewall policy with LDAP users and place it on the top of list of firewall policies.
- C. Enable two-factor authentication with FSSO.
- D. Under config user settings configure set auth-on-demand implicit.
Answer: A
Explanation:
The OT supervisor should configure a firewall policy with FSSO users and place it on the top of list of firewall policies in order to achieve the goal of authenticating users against passive authentication first and, if passive authentication is not successful, then challenging them with active authentication.
NEW QUESTION # 25
What two advantages does FortiNAC provide in the OT network? (Choose two.)
- A. It can be used for network micro-segmentation.
- B. It can be used for device profiling.
- C. It can be used for industrial intrusion detection and prevention.
- D. It can be used for IoT device detection.
Answer: A,B
NEW QUESTION # 26
Refer to the exhibit.
Based on the topology designed by the OT architect, which two statements about implementing OT security are true? (Choose two.)
- A. IT and OT networks are separated by segmentation.
- B. Micro-segmentation can be achieved only by replacing FortiGate-3 and FortiGate-4 with a pair of FortiSwitch devices.
- C. FortiGate-3 and FortiGate-4 devices must be in a transparent mode.
- D. Firewall policies should be configured on FortiGate-3 and FortiGate-4 with industrial protocol sensors.
Answer: A,C
NEW QUESTION # 27
An OT administrator deployed many devices to secure the OT network. However, the SOC team is reporting that there are too many alerts, and that many of the alerts are false positive. The OT administrator would like to find a solution that eliminates repetitive tasks, improves efficiency, saves time, and saves resources.
Which products should the administrator deploy to address these issues and automate most of the manual tasks done by the SOC team?
- A. FortiSOAR and FortiSIEM
- B. FortiSIEM and FortiManager
- C. FortiSandbox and FortiSIEM
- D. A syslog server and FortiSIEM
Answer: A
NEW QUESTION # 28
Which three criteria can a FortiGate device use to look for a matching firewall policy to process traffic? (Choose three.)
- A. Highest to lowest priority defined in the firewall policy
- B. Lowest to highest policy ID number
- C. Source defined as internet services in the firewall policy
- D. Services defined in the firewall policy.
- E. Destination defined as internet services in the firewall policy
Answer: C,D,E
NEW QUESTION # 29
What two advantages does FortiNAC provide in the OT network? (Choose two.)
- A. It can be used for IoT device detection.
- B. It can be used for network micro-segmentation.
- C. It can be used for device profiling.
- D. It can be used for industrial intrusion detection and prevention.
Answer: A,C
Explanation:
Typically, in a microsegmented network, NGFWs are used in conjunction with VLANs to implement security policies and to inspect and filter network communications. Fortinet FortiSwitch and FortiGate NGFW offer an integrated approach to microsegmentation.
NEW QUESTION # 30
An OT administrator configured and ran a default application risk and control report in FortiAnalyzer to learn more about the key application crossing the network. However, the report output is empty despite the fact that some related real-time and historical logs are visible in the FortiAnalyzer.
What are two possible reasons why the report output was empty? (Choose two.)
- A. The administrator selected the wrong logs to be indexed in FortiAnalyzer.
- B. The administrator selected the wrong time period for the report.
- C. The administrator selected the wrong hcache table for the report.
- D. The administrator selected the wrong devices in the Devices section.
Answer: B,C
NEW QUESTION # 31
What can be assigned using network access control policies?
- A. FortiNAC device polling methods
- B. Logical networks
- C. Profiling rules
- D. Layer 3 polling intervals
Answer: B
NEW QUESTION # 32
Which three common breach points can be found in a typical OT environment? (Choose three.)
- A. Hard hat
- B. Global hat
- C. RTU exploits
- D. VLAN exploits
- E. Black hat
Answer: A,C,E
NEW QUESTION # 33
Refer to the exhibit.
Based on the Purdue model, which three measures can be implemented in the control area zone using the Fortinet Security Fabric? (Choose three.)
- A. FortiEDR for endpoint detection
- B. FortiNAC for network access control
- C. FortiGate for application control and IPS
- D. FortiSIEM for security incident and event management
- E. FortiGate for SD-WAN
Answer: A,B,C
NEW QUESTION # 34
Refer to the exhibit.
An OT architect has implemented a Modbus TCP with a simulation server Conpot to identify and control the Modus traffic in the OT network. The FortiGate-Edge device is configured with a software switch interface ssw-01.
Based on the topology shown in the exhibit, which two statements about the successful simulation of traffic between client and server are true? (Choose two.)
- A. The FortiGate devices is in offline IDS mode.
- B. NAT is disabled in the FortiGate firewall policy from port3 to ssw-01.
- C. Port5 is not a member of the software switch.
- D. The FortiGate-Edge device must be in NAT mode.
Answer: B,D
NEW QUESTION # 35
An administrator wants to use FortiSoC and SOAR features on a FortiAnalyzer device to detect and block any unauthorized access to FortiGate devices in an OT network.
Which two statements about FortiSoC and SOAR features on FortiAnalyzer are true? (Choose two.)
- A. You cannot use Windows and Linux hosts security events with FortiSoC.
- B. You must set correct operator in event handler to trigger an event.
- C. You can automate SOC tasks through playbooks.
- D. Each playbook can include multiple triggers.
Answer: C,D
Explanation:
Ref: https://docs.fortinet.com/document/fortianalyzer/7.0.0/administration-guide/268882/fortisoc
NEW QUESTION # 36
What can be assigned using network access control policies?
- A. FortiNAC device polling methods
- B. Profiling rules
- C. Layer 3 polling intervals
- D. Logical networks
Answer: B
NEW QUESTION # 37
An OT network architect needs to secure control area zones with a single network access policy to provision devices to any number of different networks.
On which device can this be accomplished?
- A. FortiSwitch
- B. FortiGate
- C. FortiNAC
- D. FortiEDR
Answer: C
NEW QUESTION # 38
An OT administrator has configured FSSO and local firewall authentication. A user who is part of a user group is not prompted from credentials during authentication.
What is a possible reason?
- A. FortiGate determined the user by passive authentication
- B. FortiNAC determined the user by DHCP fingerprint method
- C. The user was determined by Security Fabric
- D. Two-factor authentication is not configured with RADIUS authentication method
Answer: A
NEW QUESTION # 39
......
Pass NSE7_OTS-6.4 Exam - Real Questions and Answers: https://pass4sure.testvalid.com/NSE7_OTS-6.4-valid-exam-test.html