Get Instant Access of 100% REAL 300-710 DUMP Pass Your Exam Easily
300-710 Free Exam Questions with Quality Guaranteed
Cisco 300-710 exam is designed for professionals who are responsible for implementing and managing security solutions using Cisco Firepower technology. 300-710 exam covers a range of topics related to network security, such as network access control, threat defense, and malware protection. It also includes hands-on lab exercises to test the candidate's ability to configure and troubleshoot Firepower devices and software.
NEW QUESTION # 40
Which two dynamic routing protocols are supported in Firepower Threat Defense without using FlexConfig?
(Choose two.)
- A. IS-IS
- B. EIGRP
- C. static routing
- D. BGP
- E. OSPF
Answer: D,E
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/660/fdm/fptd-fdm-config-guide-660
/fptd- fdm-routing.html
NEW QUESTION # 41
Refer to the exhibit.
What is the effect of the existing Cisco FMC configuration?
- A. The remote management port for communication between the Cisco FMC and the managed device changes to port 8443.
- B. The management connection between the Cisco FMC and the Cisco FTD is disabled.
- C. The managed device is deleted from the Cisco FMC.
- D. The SSL-encrypted communication channel between the Cisco FMC and the managed device becomes plain-text communication channel.
Answer: B
NEW QUESTION # 42
What is the role of realms in the Cisco ISE and Cisco Secure Firewall Management Center integration?
- A. Cisco Secure Firewall VDC
- B. Cisco ISE context
- C. (Option not provided - please confirm or provide)
- D. TACACS+ database
- E. AD definition
Answer: A
NEW QUESTION # 43
Which interface type allows packets to be dropped?
- A. TAP
- B. inline
- C. ERSPAN
- D. passive
Answer: B
Explanation:
https://www.cisco.com/c/en/us/support/docs/security/firepower-ngfw/200908-configuring-firepower-threat-defense-int.html
NEW QUESTION # 44
Which command should be used on the Cisco FTD CLI to capture all the packets that hit an interface?
- A. capture-traffic
- B. configure coredump packet-engine enable
- C. capture WORD
- D. capture
Answer: D
Explanation:
Reason: the command "capture-traffic" is used for SNORT Engine Captures. To capture a LINA Engine Capture, you use the "capture" command. Since the Lina Engine represents the actual physical interface of the device, "capture" is the only reasonable choice Reference:
https://www.cisco.com/c/en/us/support/docs/security/firepower-ngfw/212474-working-with-firepower-threat-def The command is firepower# capture DMZ interface dmz trace detail match ip host 192.168.76.14 host 192.168.76.100 firepower# capture INSIDE interface inside trace detail match ip host 192.168.76.14 host 192.168.75.14
NEW QUESTION # 45
Which report template field format is available in Cisco FMC?
- A. benchmark chart
- B. bar chart
- C. box lever chart
- D. arrow chart
Answer: B
Explanation:
Section: Management and Troubleshooting
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/60/configuration/guide/fpmc-config-guide- v60/Working_with_Reports.html
NEW QUESTION # 46
Which two types of objects are reusable and supported by Cisco FMC? (Choose two.)
- A. network-based objects that represent FQDN mappings and networks, port/protocol pairs, VXLAN tags, security zones and origin/destination country
- B. dynamic key mapping objects that help link HTTP and HTTPS GET requests to Layer 7 application protocols.
- C. reputation-based objects that represent Security Intelligence feeds and lists, application filters based on category and reputation, and file lists
- D. network-based objects that represent IP address and networks, port/protocols pairs, VLAN tags, security zones, and origin/destination country
- E. reputation-based objects, such as URL categories
Answer: C,D
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/620/configuration/guide/fpmc-config- guide-v62/reusable_objects.html#ID-2243-00000414
NEW QUESTION # 47
Which file format can standard reports from Cisco Secure Firewall Management Center be downloaded in?
- A. doc
- B. xis
- C. ppt
- D. csv
Answer: D
Explanation:
Standard reports from Cisco Secure Firewall Management Center can be downloaded in CSV (Comma-Separated Values) format. This format is widely used for data exchange and can be opened in various applications such as Microsoft Excel.
Steps to download reports:
* Navigate to Reports > Report Designer in the FMC.
* Select or create the report you wish to download.
* Choose the CSV format option when exporting the report.
This allows the network engineer to analyze and manipulate the report data easily.
References: Cisco Secure Firewall Management Center Administrator Guide, Chapter on Report Generation.
NEW QUESTION # 48
An administrator is adding a new URL-based category feed to the Cisco FMC for use within the policies. The intelligence source does not use STIX. but instead uses a .txt file format. Which action ensures that regular updates are provided?
- A. Convert the .txt file to STIX and upload it to the Cisco FMC.
- B. Upload the .txt file and configure automatic updates using the embedded URL.
- C. Add a TAXII feed source and input the URL for the feed.
- D. Add a URL source and select the flat file type within Cisco FMC.
Answer: C
NEW QUESTION # 49
What is the advantage of having Cisco Firepower devices send events to Cisco Threat response via the security services exchange portal directly as opposed to using syslog?
- A. Firepower devices do not need to be connected to the internet.
- B. An on-premises proxy server does not need to set up and maintained
- C. Supports all devices that are running supported versions of Firepower
- D. All types of Firepower devices are supported.
Answer: B
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/integrations/CTR/ Firepower_and_Cisco_Threat_Response_Integration_Guide.pdf
NEW QUESTION # 50
An engineer is troubleshooting application failures through a FTD deployment. While using the FMC CLI. it has been determined that the traffic in question is not matching the desired policy. What should be done to correct this?
- A. Use the system support network-options command to fine tune the policy.
- B. Use the system support application-identification-debug command to determine which rules the traffic matching and modify the rule accordingly
- C. Use the system support firewall-engine-dump-user-f density-data command to change the policy and allow the application through the firewall.
- D. Use the system support firewall-engine-debug command to determine which rules the traffic matching and modify the rule accordingly
Answer: B
NEW QUESTION # 51
Which action must be taken to permit communication between a bridge group and routed interface on Cisco Secure Firewall?
- A. Enable split tunneling.
- B. Create an access rule to allow the traffic.
- C. Create an ACL for the bridge group.
- D. Define a source NAT address.
Answer: B
NEW QUESTION # 52
An engineer is configuring a second Cisco FMC as a standby device but is unable to register with the active unit. What is causing this issue?
- A. The code versions running on the Cisco FMC devices are different
- B. The licensing purchased does not include high availability
- C. The primary FMC currently has devices connected to it.
- D. There is only 10 Mbps of bandwidth between the two devices.
Answer: A
Explanation:
https://www.cisco.com/c/en/us/td/docs/security/firepower/620/configuration/guide/fpmc-config-guide-v62/firepower_management_center_high_availability.html
NEW QUESTION # 53
An organization is migrating their Cisco ASA devices running in multicontext mode to Cisco FTD devices.
Which action must be taken to ensure that each context on the Cisco ASA is logically separated in the Cisco FTD devices?
- A. Configure the Cisco FTD to use port channels spanning multiple networks.
- B. Configure a container instance in the Cisco FTD for each context in the Cisco ASA.
- C. Add the Cisco FTD device to the Cisco ASA port channels.
- D. Add a native instance to distribute traffic to each Cisco FTD context.
Answer: C
NEW QUESTION # 54
Refer to the exhibit.
An engineer is modifying an access control policy to add a rule to Inspect all DNS traffic that passes it making the change and deploying the policy, they see that DNS traffic Is not being Inspected by the Snort engine.
What is......
- A. The action of the rule is set to trust instead of allow.
- B. The rule Is configured with the wrong setting for the source port.
- C. The rule must define the source network for inspection as well as the port.
- D. The rule must specify the security zone that originates the traffic.
Answer: A
NEW QUESTION # 55
Which CLI command is used to control special handling of ClientHello messages?
- A. system support ssl-client-hello-reset
- B. system support ssl-client-hello-force-reset
- C. system support ssl-client-hello-tuning
- D. system support ssl-client-hello-display
Answer: C
NEW QUESTION # 56
A security engineer needs to configure a network discovery policy on a Cisco FMC appliance and prevent excessive network discovery events from overloading the FMC database? Which action must be taken to accomplish this task?
- A. Exclude load balancers and NAT devices in the policy.
- B. Monitor only the default IPv4 and IPv6 network ranges.
- C. Configure NetFlow exporters for monitored networks.
- D. Change the network discovery method to TCP/SYN.
Answer: A
NEW QUESTION # 57
Encrypted Visibility Engine (EVE) is enabled under which lab on an access control policy in Cisco Secure Firewall Management Centre?
- A. SSL
- B. Advanced
- C. Security Intelligence
- D. Network Analysis Policy
Answer: A
Explanation:
The Encrypted Visibility Engine (EVE) in Cisco Secure Firewall Management Center is enabled under the SSL tab of an access control policy. EVE provides visibility into encrypted traffic, allowing the firewall to detect threats even when traffic is encrypted.
Steps to enable EVE:
* Navigate to the access control policy in FMC.
* Go to the SSL tab.
* Enable Encrypted Visibility Engine (EVE) to analyze encrypted traffic.
This configuration helps in identifying and mitigating threats within encrypted traffic without the need for full decryption.
References: Cisco Secure Firewall Management Center Configuration Guide, Chapter on SSL and Encrypted Traffic Visibility.
NEW QUESTION # 58
An engineer configures a network discovery policy on Cisco FMC. Upon configuration, it is noticed that excessive and misleading events filing the database and overloading the Cisco FMC.
A monitored NAT device is executing multiple updates of its operating system in a short period of time. What configuration change must be made to alleviate this issue?
- A. Increase the number of entries on the NAT device.
- B. Leave default networks.
- C. Change the method to TCP/SYN.
- D. Exclude load balancers and NAT devices.
Answer: D
NEW QUESTION # 59
Refer to the exhibit.
And engineer is analyzing the Attacks Risk Report and finds that there are over 300 instances of new operating systems being seen on the network How is the Firepower configuration updated to protect these new operating systems?
- A. Cisco Firepower gives recommendations to update the policies.
- B. The administrator manually updates the policies.
- C. Cisco Firepower automatically updates the policies.
- D. The administrator requests a Remediation Recommendation Report from Cisco Firepower
Answer: A
Explanation:
Explanation
Ref:
https://www.cisco.com/c/en/us/td/docs/security/firepower/60/configuration/guide/fpmc-config-guide-v60/Tailori
NEW QUESTION # 60
......
The Securing Networks with Cisco Firepower certification exam consists of 60-70 multiple-choice and simulation-based questions, and candidates have 90 minutes to complete it. 300-710 exam is available in English and Japanese and can be taken at any Pearson VUE testing center worldwide. Successful candidates will be awarded the Cisco Certified Network Professional Security (CCNP Security) certification, which is recognized globally as a mark of excellence in network security.
300-710 Free Exam Files Downloaded Instantly: https://pass4sure.testvalid.com/300-710-valid-exam-test.html