2026 TestValid USGBC LEED-AP-BD-C Dumps and Exam Test Engine
USGBC LEED-AP-BD-C DUMPS WITH REAL EXAM QUESTIONS
USGBC LEED-AP-BD-C Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
NEW QUESTION # 36
A facility manager cleaning highly reflective paving material is
- A. unnecessarily wasting water
- B. lowering the Solar Reflectance Index (SRI)
- C. reducing the heat island effect
- D. increasing the heat island effect
Answer: C
Explanation:
The heat island effect is the phenomenon of urban areas having higher air temperatures than surrounding rural areas due to the absorption and emission of heat by human-made surfaces, such as buildings, roads, and pavements. The heat island effect can have negative impacts on the environment, human health, and energy consumption. One of the strategies to reduce the heat island effect is to use highly reflective paving materials that have a high solar reflectance index (SRI), which measures the ability of a surface to reflect solar radiation and stay cool. However, over time, the paving materials can accumulate dirt and dust, which can lower their reflectance and increase their heat absorption. Therefore, a facility manager cleaning highly reflective paving material is reducing the heat island effect by restoring the reflectance and cooling potential of the surface12.
Reference:
* Heat Island Reduction | U.S. Green Building Council1
* SpecTopics: Heat Island Reduction Credit and LEED V4/V4.1 - Carlisle SynTec
NEW QUESTION # 37
Which rating system is appropriate for a new mixed-use building with 300,000 ft2 (27 871 m2) of residential units, 150,000 ft2 (13 935 m2) hotel and 50,000 ft2 (4 645 m2) of retail space?
- A. New Construction
- B. Core and Shell Development
- C. Retail
- D. Hospitality
Answer: A
Explanation:
Explanation
New Construction is the appropriate rating system for a new mixed-use building with 300,000 ft2 (27 871 m2) of residential units, 150,000 ft2 (13 935 m2) hotel and 50,000 ft2 (4 645 m2) of retail space. According to the LEED rating system selection guidance1, the New Construction rating system applies to buildings that are being newly constructed or going through a major renovation, and that include any of the following use types:
office, retail, hospitality, education, residential, warehouse and distribution centers, or data centers2. The New Construction rating system can also be used for mixed-use buildings that have more than one use type3. Since the project involves new construction of a mixed-use building with residential, hospitality, and retail uses, the New Construction rating system is the most suitable option. The other rating systems are not applicable because they are either specific to one use type (Retail and Hospitality) or to buildings that are not complete at the time of certification (Core and Shell Development).
LEED rating system selection guidance | U.S. Green Building Council
LEED v4: Building Design + Construction Guide - U.S. Green Building Council LEED v4 Rating Systems | USGBC-LI
NEW QUESTION # 38
A luxury hotel project is in the design phase and is located on a scenic waterfront. It is one point away from attaining LEED Platinum certification. The LEED AP is recommending that the team pursue Innovation Credit, Innovation, Option 3. Additional Strategies. Which of the following credits would be desirable considering the location of the project?
- A. Indoor Environmental Quality Credit, Quality Views, Exemplary Performance
- B. Energy and Atmosphere Credit, Enhanced Commissioning, Exemplary Performance
- C. Energy and Atmosphere Credit, Optimize Energy Performance, Exemplary Performance
- D. Indoor Environmental Quality Credit, Acoustic Performance, Exemplary Performance
Answer: A
Explanation:
The LEED Platinum certification requires the project to achieve exemplary performance in at least one credit that allows it, as specified in the LEED Reference Guide1. One of the credits that meets this criterion is the Indoor Environmental Quality Credit, which focuses on providing healthy and comfortable indoor environments for occupants. The credit has two options: Quality Views and Enhanced Commissioning. Quality Views requires the project to have windows that provide views of natural scenery or water bodies, which can enhance the well-being and satisfaction of occupants. Enhanced Commissioning requires the project to have a comprehensive commissioning plan that ensures all systems are properly installed, tested, and operated before occupancy. Both options can help reduce energy consumption, improve indoor air quality, and create a positive sensory experience for occupants.
Reference:
LEED Reference Guide v4
LEED Platinum Certification - LD Products
LEED Accreditation | LEED Certification & Credentials Overview - GBES
NEW QUESTION # 39
Which of the following strategies can be used to achieve a point in Innovation Credit, Innovation, Option 1.
Innovation?
- A. Purchase green power for 100% of the total project energy use
- B. Use on site renewable energy for 8% of the total energy needs
- C. Achieve 60% reduction in outdoor water use
- D. Implement an employee engagement and education plan
Answer: D
Explanation:
Option 1 of the Innovation credit under LEED v4.1 BD+C rating system (Building Design and Construction) allows for achieving significant, measurable environmental performance using a strategy not addressed in the LEED green building rating system1. Implementing an employee engagement and education plan could be a unique strategy that promotes sustainability and environmental stewardship, which is not specifically addressed in the LEED rating system.
NEW QUESTION # 40
When calculating the reverberation time of a room, which of the following pieces of information is least relevant?
- A. Height and width of room
- B. Sound absorption coefficient of the floor surface
- C. Noise reduction coefficient of the ceiling surface
- D. Operating sound level of nearest HVAC equipment
Answer: D
Explanation:
Explanation
When calculating the reverberation time of a room, the operating sound level of the nearest HVAC equipment is the least relevant piece of information. The reverberation time is the time it takes for the sound to decay by
60 decibels after the source stops emitting sound. The reverberation time depends on the volume and the surface area of the room, as well as the sound absorption coefficients of the materials that cover the surfaces.
The height and width of the room are needed to calculate the volume and the surface area. The noise reduction coefficient of the ceiling surface and the sound absorption coefficient of the floor surface are needed to calculate the total sound absorption of the room. The operating sound level of the nearest HVAC equipment is not relevant for calculating the reverberation time, but it may affect the background noise level and the speech intelligibility in the room.
References:
*LEED v4 Reference Guide for Building Design and Construction, Indoor Environmental Quality Credit:
Acoustic Performance, page 7101
*Sounds of Silence: Acoustic Performance in LEED v4.12
NEW QUESTION # 41
A comprehensive rainwater management plan may include design elements such as
- A. soil compaction, swales, vegetated roofs and xeriscaping
- B. bioretention pond, cisterns, porous pavement and stabilized construction entrance
- C. artificial turf, bioretention pond, cisterns and hay bales
- D. cisterns, porous pavement, swales and vegetated roofs
Answer: D
Explanation:
These design elements are examples of low-impact development (LID) and green infrastructure (GI) practices that can reduce runoff volume and improve water quality by replicating the natural hydrology and water balance of the site1. Cisterns can collect and store rainwater for reuse or infiltration, porous pavement can allow water to seep into the ground, swales can convey and filter stormwater runoff, and vegetated roofs can reduce runoff and evapotranspiration2.
References: = LEED v4: Building Design + Construction Guide, Achieving SSc Rainwater Management in LEED v4.1.
NEW QUESTION # 42
A project team has installed a rainwater harvesting system on site. In which of the following could this system be recognized?
- A. Water Efficiency Credit, Water Metering and Water Efficiency Prerequisite, Indoor Water Use Reduction
- B. Sustainable Sites Credit, Rainwater Management and Water Efficiency Prerequisite, Indoor Water Use Reduction
- C. Water Efficiency Credit, Water Metering and Water Efficiency Prerequisite, Outdoor Water Use Reduction
- D. Sustainable Sites Credit, Rainwater Management and Water Efficiency Credit, Indoor Water Use Reduction
Answer: D
Explanation:
Explanation
A rainwater harvesting system on site could be recognized in the Sustainable Sites Credit, Rainwater Management and the Water Efficiency Credit, Indoor Water Use Reduction. The Sustainable Sites Credit, Rainwater Management rewards projects that reduce runoff volume and improve water quality by replicating the natural hydrology and water balance of the site1. A rainwater harvesting system can help achieve this by capturing and reusing rainwater on site2. The Water Efficiency Credit, Indoor Water Use Reduction rewards projects that reduce indoor water consumption by installing water-efficient fixtures and fittings3. A rainwater harvesting system can help achieve this by providing an alternative source of water for non-potable uses such as toilet flushing and irrigation4.
The other options are not correct. The Water Efficiency Credit, Water Metering does not recognize rainwater harvesting systems, but rather requires projects to install permanent water meters that measure the total potable water use for the building and grounds. The Water Efficiency Prerequisite, Outdoor Water Use Reduction does not recognize rainwater harvesting systems, but rather requires projects to reduce outdoor water consumption by using plant species that are native or adapted to the region and by using irrigation systems that are efficient and properly controlled. The Water Efficiency Prerequisite, Indoor Water Use Reduction does not recognize rainwater harvesting systems, but rather requires projects to reduce indoor water consumption by 20% from the baseline by installing water-efficient fixtures and fittings.
References:
*Rainwater Management, p. 1
*NC-v4 SSc4: Rainwater management, p. 2
*Indoor water use reduction, p. 1
*NC-v4 WEc3: Indoor water use reduction, p. 3
*[Water metering], p. 1
*[Outdoor water use reduction], p. 1
*[Indoor water use reduction], p. 2
NEW QUESTION # 43
Sustainable Sites Credit, Site Assessment requires evaluation of
- A. topography, hydrology, human use
- B. soils, archeology, hydrology
- C. human health effects, climate, land value
- D. vegetation, topography, archaeology
Answer: A
Explanation:
The Sustainable Sites Credit, Site Assessment requires the project to conduct and document a site inventory and analysis that evaluates the existing conditions and features of the site, such as topography, hydrology, human use, climate, vegetation, soils, and human health effects1. The purpose of the site assessment is to inform the design and development of the site in a way that protects, restores, and enhances the environmental quality and performance of the site1. The site assessment should include the following elements:
* Topography: The shape and elevation of the land surface, including slopes, drainage patterns, and erosion potential.
* Hydrology: The movement, distribution, and quality of water on the site, including surface water, groundwater, precipitation, and runoff.
* Human use: The current and planned use of the site and its surroundings, including zoning, land use, transportation, utilities, and cultural resources.
* Climate: The long-term weather patterns and conditions of the site, including temperature, humidity, wind, solar radiation, and precipitation.
* Vegetation: The types, distribution, and condition of plants on the site, including native, invasive, and endangered species, and their ecological functions and values.
* Soils: The physical, chemical, and biological properties of the soil on the site, including texture, structure, organic matter, pH, fertility, and contamination.
* Human health effects: The potential impacts of the site conditions and features on the health and well- being of the occupants and the surrounding community, such as noise, air quality, water quality, and exposure to hazardous substances.
References:
* LEED Reference Guide for Building Design and Construction v4
* Sustainable Sites Credit, Site Assessment
* Site Assessment - SITES
* Site Assessment and Analysis - Whole Building Design Guide
NEW QUESTION # 44
When working on a renovation project, asbestos containing materials have been found on the perimeter walls. When calculating the percentage of building being reused under the Materials and Resources Credit, Building Life-Cycle Impact Reduction, the materials remediated will be
- A. excluded if the total volume is more than 25% of the building being reused
- B. excluded from the calculation
- C. included in the calculation
- D. excluded if the total volume is less than 25% of the building being reused
Answer: B
Explanation:
The Materials and Resources Credit, Building Life-Cycle Impact Reduction, rewards projects that reuse existing building structures and envelopes, or salvage materials from off-site or on-site sources. According to the LEED v4 Reference Guide for Building Design and Construction, the project team must calculate the percentage of building being reused by dividing the area of the existing building structure and envelope that is reused by the total area of the completed building structure and envelope1. However, the project team must exclude from the calculation any hazardous materials that are remediated as a part of the project, such as asbestos, lead, mold, or PCBs1. Therefore, the asbestos containing materials found on the perimeter walls will be excluded from the calculation, regardless of the volume.
Reference:
* LEED v4 Reference Guide for Building Design and Construction, Materials and Resources Credit: Building Life-Cycle Impact Reduction, page 5451
* Building life-cycle impact reduction | U.S. Green Building Council2
NEW QUESTION # 45
An HVAC system consists of an air handler supplying conditioned air (mixture of return air and outdoor air) to an office, corridor, conference room and lobby. For Indoor Environmental Quality Prerequisite, Minimum Indoor Air Quality Performance, the ventilation rate procedure calculations must be based upon what HVAC system configuration?
- A. Single-zone system
- B. Multiple-zone system
- C. Mixed-mode system
- D. 100% outdoor air system
Answer: B
Explanation:
A multiple-zone system is a system that has one or more air handlers supplying conditioned air to more than one zone. A zone is a space or group of spaces within a building with heating and cooling requirements that are sufficiently similar so that desired conditions (e.g., temperature) can be maintained throughout using a single controlling device. The ventilation rate procedure calculations must be based on the multiple-zone system configuration because the HVAC system in the question serves different zones with different ventilation requirements. Reference: LEED v4 Reference Guide for Building Design and Construction, p. 6881; ASHRAE Standard 62.1-2010, Section 6.2.52
NEW QUESTION # 46
LEED project boundaries that include multiple similar buildings which are all eligible for certification can be registered as which of the following?
- A. Group project
- B. Neighborhood project
- C. Master Site project
- D. Batch project
Answer: A
Explanation:
LEED project boundaries that include multiple similar buildings which are all eligible for certification can be registered as a group project. A group project allows multiple buildings (or interior spaces within multiple buildings) on a shared site to be certified as a single LEED project. These projects must meet the criteria outlined in the LEED Campus Guidance for Projects on a Shared Site, such as having the same construction contract, ownership, management, space type, rating system, and compliance paths. A group project will receive one certification and rating for the entire group.
NEW QUESTION # 47
When the LEED AP is applying the Integrative Process to a Building Design and Construction project, which of the following information is required to be present in the Owner's Project Requirements (OPR)?
- A. Energy efficiency goals and training requirements
- B. All applicable codes and standards
- C. All project team members and applicable roles
- D. Interior finishes related to the project
Answer: A
Explanation:
Explanation
Energy efficiency goals and training requirements are required to be present in the Owner's Project Requirements (OPR) when applying the Integrative Process to a Building Design and Construction project.According to the LEED v4 BD+C ReferenceGuide, the OPR is a document that details the ideas, concepts, and criteria that are determined by the owner to be important to the success of the project1.The OPR must include, among other things, the following information related to energy efficiency1:
* The owner's energy performance goals and expectations
* The owner's requirements for energy metering and monitoring
* The owner's requirements for energy modeling and analysis
* The owner's requirements for commissioning and verification
* The owner's requirements for training and documentation
The other options are not required to be present in the OPR, as they are either related to other aspects of the project, such as codes and standards, interior finishes, or project team members, or they are not relevant to the Integrative Process, which focuses on early analysis of energy, water, and site systems2.References: LEED v4 BD+C Reference Guide, Integrative Process Category, IPc Integrative Process, page 632.
NEW QUESTION # 48
Which federal agency designates Federal Renewal Community sites, which can be considered High Priority Sites for project development?
- A. U.S. Department of Housing and Urban Development
- B. U.S. Internal Revenue Service
- C. U.S. Environmental Protection Agency
- D. U.S. Department of Agriculture
Answer: B
Explanation:
Explanation
According to the LEED v4: Building Design + Construction Guide, Federal Renewal Community sites are designated by the U.S. Internal Revenue Service (IRS) as areas that are eligible for tax incentives to encourage businesses to locate and hire residents within the community. These sites are considered High Priority Sites for project development, as they support the revitalization of economically distressed areas. The other federal agencies listed do not designate Federal Renewal Community sites. References: LEED v4: Building Design + Construction Guide, Location and Transportation Credit, High Priority Site, Requirements1; U.S. Internal Revenue Service, Renewal Communities2
NEW QUESTION # 49
A commercial new construction project consists of mixed space usage. When deciding which LEED rating system to use, the LEED AP should follow which of the following rules?
- A. If a rating system is appropriate for 30% to 60% of the gross floor area, the project team must independently assess their situation and decide which rating system is most applicable
- B. If a rating system is appropriate for more than 50% of the gross floor area of LEED project space, then that rating system must be used
- C. If a rating system is appropriate for less than 50% of the gross area of the LEED project space then the rating system must not be used
- D. If a rating system is appropriate for 40% to 60% of the gross floor area, the project team must independently assess their situation and decide which rating system is most applicable
Answer: D
Explanation:
According to the LEED v4: Building Design + Construction Guide, the 40/60 rule provides guidance for making a decision when several rating systems appear to be appropriate for a project. To use this rule, first assign a rating system to each square foot or square meter of the building, and then choose the most appropriate rating system based on the resulting percentages. The entire gross floor area of a LEED project must be certified under a single rating system and is subject to all prerequisites and attempted credits in that rating system, regardless of mixed construction or space usage type. If a rating system is appropriate for less than 40% of the gross floor area of a LEED project building or space, then that rating system should not be used. If a rating system is appropriate for more than 60% of the gross floor area of a LEED project building or space, then that rating system should be used. If an appropriate rating system falls between 40% and 60% of the gross floor area, project teams must independently assess their situation and decide which rating system is most applicable1. References: LEED v4: Building Design + Construction Guide, LEED Rating System Selection Guidance1
NEW QUESTION # 50
A facility manager cleaning highly reflective paving material is
- A. unnecessarily wasting water
- B. lowering the Solar Reflectance Index (SRI)
- C. reducing the heat island effect
- D. increasing the heat island effect
Answer: C
Explanation:
The heat island effect is the phenomenon of urban areas having higher air temperatures than surrounding rural areas due to the absorption and emission of heat by human-made surfaces, such as buildings, roads, and pavements. The heat island effect can have negative impacts on the environment, human health, and energy consumption. One of the strategies to reduce the heat island effect is to use highly reflective paving materials that have a high solar reflectance index (SRI), which measures the ability of a surface to reflect solar radiation and stay cool. However, over time, the paving materials can accumulate dirt and dust, which can lower their reflectance and increase their heat absorption. Therefore, a facility manager cleaning highly reflective paving material is reducing the heat island effect by restoring the reflectance and cooling potential of the surface12.
NEW QUESTION # 51
Which of the following would be classified as a public use faucet?
- A. Dorm room sink
- B. Patient room sink
- C. School classroom sink
- D. Hotel sink
Answer: C
Explanation:
Under LEED BD+C Water Efficiency (WE) credits, a public use faucet is defined as a sink or faucet that is available for general use in shared spaces, rather than being restricted to private, residential, or patient- specific settings.
* School classroom sinks are used by multiple people throughout the day, making them a public use fixture.
* Patient room sinks, hotel sinks, and dorm room sinks are considered private use fixtures, as they are designated for individual users or a limited number of occupants.
LEED water efficiency calculations differentiate between private and public use fixtures due to differences in water usage patterns and flow rate requirements.
(Source: Official LEED BD+C Reference Manual)
NEW QUESTION # 52
What LEED Building Design and Construction rating system mandates a preliminary LEED meeting with the principal members of the project team to create a LEED action plan that includes the anticipated certification tier, targeted credits and parties responsible for each credit?
- A. Data centers
- B. Healthcare
- C. Schools
- D. Hospitality
Answer: A
Explanation:
Explanation
Data centers is the only LEED BD+C rating system that mandates a preliminary LEED meeting with the principal members of the project team to create a LEED action plan that includes the anticipated certification tier, targeted credits and parties responsible for each credit. This is because data centers have unique design and operational characteristics that require a more integrative and customized approach to achieve LEED certification. The preliminary LEED meeting is intended to facilitate early goal setting, alignment, and communication among the project team members12. References: LEED BD+C Reference Guide, Data Centers, page 91; LEED v4.1 BD+C: Data Centers
NEW QUESTION # 53
A new five-story building with a 30,000 ft2 (2 800 m2) footprint is being designed on a previously disturbed100,000 ft2 (9 290 m2) site. The remaining on-grade surface will be 35,000 ft2 (3 250 m2) of asphalt parking, and 35,000 ft2 (3 250 m2) of native vegetated open space. To achieve a point for exemplary performance under Option 1 of Sustainable Sites Credit, Site Development - Protect or Restore Habitat, the design team will have to incorporate a native and/or adapted vegetated roof with a minimum area of
- A. 12,500 ft2 (1 160 m2)
- B. 15,000 ft2 (1 400 m2)
- C. 25,000 ft2 (2 300 m2)
- D. 35,000 ft2 (3 250 m2)
Answer: C
Explanation:
According to the LEED v4 Reference Guide for Building Design and Construction, Option 1 of the Site Development - Protect or Restore Habitat credit requires restoring 25% of the site area (including the building footprint) with native or adapted vegetation1. To achieve exemplary performance, the project must double the credit requirements and restore 50% of the site area2. In this case, the site area is 100,000 ft2 (9 290 m2), so the project must restore 50,000 ft2 (4 645 m2) with vegetation. The project already has 35,000 ft2 (3 250 m2) of native vegetated open space, so it needs to add another 15,000 ft2 (1 395 m2) of vegetation. Since the on-grade surface is fully occupied by the building footprint and the asphalt parking, the only option is to incorporate a vegetated roof. Therefore, the design team will have to incorporate a native and/or adapted vegetated roof with a minimum area of 15,000 ft2 (1 395 m2). Reference: SS Credit Site Development - Protect or Restore Habitat, LEED v4 Reference Guide for Building Design and Construction13
NEW QUESTION # 54
In a large industrial or commercial building, which energy end uses are classified as systems composed of discrete pieces of equipment that can be metered together for the purposes of Energy and Atmosphere Credit, Advanced Energy Metering?
- A. Water flow system used for public faucets and toilets
- B. Electrical lighting system during peak use hours
- C. HVAC air system for air conditioning
- D. Condenser water system with a cooling tower and condenser water pumps
Answer: D
Explanation:
A condenser water system with a cooling tower and condenser water pumps is classified as a system composed of discrete pieces of equipment that can be metered together for the purposes of Energy and Atmosphere Credit, Advanced Energy Metering. This is because the condenser water system is a single energy end use that serves a specific function and can be isolated from other systems1. HVAC air system, electrical lighting system, and water flow system are not considered as single energy end uses, but rather as multiple energy end uses that serve different functions and cannot be easily isolated2.
NEW QUESTION # 55
An office building design has demonstrated reductions in landscape water use of 30% over baseline and indoor water use of 40%. These reductions qualify the project for:
- A. Zero points because the Water Efficiency Prerequisites are not met
- B. Four points for Water Efficiency Credit, Indoor Water Use Reduction
- C. One point for Water Efficiency Credit, Outdoor Water Use Reduction and four points for Water Efficiency Credit, Indoor Water Use Reduction
- D. One point for Water Efficiency Credit, Outdoor Water Use Reduction
Answer: C
Explanation:
Detailed
A reduction of 30% in outdoor water use qualifies the project for one point under the Outdoor Water Use Reduction credit, and a 40% reduction in indoor water use qualifies for four points under the Indoor Water Use Reduction credit. LEED awards points for water conservation strategies that significantly reduce the demand for potable water.
NEW QUESTION # 56
A project is designed to remodel an existing warehouse into multi-family housing. The exterior facade of the warehouse will remain, but 40% of the interior will be demolished and replaced for interior new construction.
New materials will be used for the new construction. To achieve points in the Materials and Resources Credit, Building Life-Cycle Impact Reduction, which credit path option would apply?
- A. Whole-Building Life-Cycle Assessment
- B. Renovation of Abandoned or Blighted Building
- C. Historic Building Reuse
- D. Building and Material Reuse
Answer: B
Explanation:
Explanation
This option applies to projects that renovate an existing building that meets the definition of abandoned or blighted, and use new materials for at least 50% of the surface area. The project meets these criteria, as the warehouse is an existing building that is presumably abandoned or blighted, and the new construction will use new materials for 40% of the interior and some of the exterior. References: LEED v4: Building Design + Construction Guide, Materials and Resources Credit, Building Life-Cycle Impact Reduction, Option 4:
Renovation of Abandoned or Blighted Building
------
NEW QUESTION # 57
The Sustainable Sites Credit, Heat Island Reduction takes into account both new and three-year aged Solar Reflectance Index (SRI) values for roofing material because
- A. SRI generally remains the same with age
- B. SRI generally does not impact the Heat Island Effect
- C. SRI generally decreases with age
- D. SRI generally increases with age
Answer: C
Explanation:
. SRI generally decreases with age
The Solar Reflectance Index (SRI) is a measure of the ability of a surface to reflect solar heat, as shown by a small temperature rise. It is calculated using the values of solar reflectance and thermal emittance of the surface. The higher the SRI, the lower the heat island effect. However, SRI generally decreases with age due to factors such as weathering, dirt accumulation, and biological growth. Therefore, the Sustainable Sites Credit, Heat Island Reduction takes into account both new and three-year aged SRI values for roofing material to ensure that the material maintains a high level of reflectance over time.
Reference:
SpecTopics: Heat Island Reduction Credit and LEED V4/V4.1 - Carlisle SynTec1 Solar Reflectance Index Measurements - Surface Optics Corp.2
NEW QUESTION # 58
Massing and orientation in Integrative Process Credit. Integrative Process evaluates how rotating the building
90 degrees affects
- A. lighting levels
- B. thermal comfort ranges
- C. energy loads
- D. ventilation methods
Answer: C
Explanation:
Massing and orientation are important factors that affect the energy performance of a building. Massing refers to the shape and size of the building, and orientation refers to the direction that the building faces. By rotating the building 90 degrees, the project team can evaluate how the change in orientation affects the energy loads of the building, such as heating, cooling, and lighting. For example, a building that faces south may receive more solar heat gain and daylight than a building that faces north, which may reduce the need for artificial lighting and heating, but increase the need for cooling and shading. The project team can use the results of the analysis to optimize the massing and orientation of the building to achieve the best energy performance.
NEW QUESTION # 59
A community center will be built on a plot in two phases. Phase 1 will include the building with a pool and gymnasium, while Phase 2 will include the outdoor grass soccer fields. For Phase 1 to achieve certification, where can the project set the LEED boundary?
- A. Around Phase 1 and 2 while committing to keep the Phase 2 grounds undisturbed
- B. Around Phase 1 and 2
- C. Around Phase 1
- D. Around Phase 1 while committing to keep the Phase 2 grounds undisturbed
Answer: D
Explanation:
Detailed Explanation:
The LEED boundary for Phase 1 can include only the building site (Phase 1) but must commit to keeping the Phase 2 grounds undisturbed until the second phase begins. This approach aligns with LEED's requirement to define boundaries where work occurs and ensures environmental protection for future development areas.
NEW QUESTION # 60
......
2026 New TestValid LEED-AP-BD-C PDF Recently Updated Questions: https://pass4sure.testvalid.com/LEED-AP-BD-C-valid-exam-test.html