Basics of Network Access
Network access covers the concepts of VLAN configuration and verification, interswitch connectivity verification and configuration, the configuration and verification of Layer 2 discovery protocols, and Cisco wireless architectures. It also addresses the configuration of wireless LAN components, WLC, and AP management access connections, and physical infrastructure connections of WLAN components.
If you are still confused about how to prepare for the IT exam, I guess you may have interest in the successful experience of others who have passed the IT exam as well as get the IT certification with the help our 200-301 Deutsch learning material: Cisco Certified Network Associate Exam (200-301 Deutsch Version). I am so proud to tell you that we have received thousands of letters of thanks from our customers in many different countries, which are the best proofs to show everyone how useful our 200-301 Deutsch practice test are. And now, our company has become the strongest one in the IT field, and the most crucial reason about why we can be so success is that we always make every endeavor to satisfy our customers, and we assure you that all of the contents in our 200-301 Deutsch learning material: Cisco Certified Network Associate Exam (200-301 Deutsch Version) are essence for the IT exam, our actual lab questions equal to the most useful and effective study resources. Now, I would like to show you some strong points of our 200-301 Deutsch study guide.
Exam Requirements
The Cisco 200-301 certification test doesn’t have any official prerequisites. However, the applicants must develop competence in the domains of the exam to improve their performance. The target audience for this test is the specialists who have 1 or more years of experience in applying and managing Cisco solutions. It is also important to possess knowledge of network fundamentals and basic IP addressing.
Less time for high efficiency
It is really unnecessary for you to take too much time in preparing for the Cisco 200-301 Deutsch exam, and 20 to 30 hours is enough for you to pass the IT exam as well as get the IT certification with the help of our actual lab questions. You may find this is hard to believe, but the fact is that the test pass rate among our customers who only practiced our 200-301 Deutsch learning material: Cisco Certified Network Associate Exam (200-301 Deutsch Version) for 20 to 30 hours has reached as high as 98% to 100%. Our actual lab questions are the positive results of many top IT experts in the world, all of the key points and the latest question patterns for the IT exam are included in our 200-301 Deutsch practice test, since there are no superfluous content in our study materials, you can finish practice all of the questions in our exam only in 20 to 30 hours, you need figure it out that the contents in our 200-301 Deutsch training materials are the panacea for the IT exam, after practicing you can feel that success is waiting for you.
No limitation for online APP version
In our website, you can find there are three kinds of 200-301 Deutsch learning material: Cisco Certified Network Associate Exam (200-301 Deutsch Version) available for you, namely, PDF Version, PC version and Online APP version, among which there is no limitation about equipment for the Online APP version, that is to say you can download the online test engine of 200-301 Deutsch practice test in any electronic devices as you like, such as your phone, computer or tablet PC to name but a few. At the same time, the most typical part of our product is that once you download the Online APP version, you still have access to our 200-301 Deutsch best questions even without the internet connection, which will make it more convenient for you and you can study almost anywhere at any time. Please believe us that we will stay true to our original purpose to offer useful 200-301 Deutsch learning material: Cisco Certified Network Associate Exam (200-301 Deutsch Version) to our customers, which will never change with the passage of time.
Instant Download 200-301 Deutsch Exam Braindumps: Upon successful payment, Our systems will automatically send the product you have purchased to your mailbox by email. (If not received within 12 hours, please contact us. Note: don't forget to check your spam.)
Cisco 200-301 Deutsch Exam Syllabus Topics:
| Section | Weight | Objectives |
|---|---|---|
| Network Fundamentals | 20% | - IPv4 and IPv6 addressing basics - Network topologies and models (OSI/TCP-IP) - Network components and architecture |
| Security Fundamentals | 15% | - Device security and access control - Security concepts and threats |
| IP Connectivity | 25% | - Static and dynamic routing (OSPF) - Routing fundamentals |
| IP Services | 10% | - DNS and NTP basics - NAT and DHCP |
| Automation and Programmability | 10% | - APIs and controller-based networking - Network automation concepts |
| Network Access | 20% | - Switching concepts and VLANs - STP and EtherChannel |
Cisco Certified Network Associate Exam (200-301 Deutsch Version) Sample Questions:
Siehe Abbildung. Ein Netzwerktechniker hat begonnen, die Standardeinstellungen von SW1 zu ändern, um Fernzugriff zu ermöglichen, und hat Folgendes im Konfigurationsmodus eingegeben:
SW1(config)#line vty 0 15
SW1(config-line)#password Labtest32!
Welche Befehle sind erforderlich, um in der laufenden Konfiguration ausschließlich SSH-Zugriff zu ermöglichen und Passwörter auszublenden?
- A. SW1(config-line)#login localSW1(config-line)#exitSW1(config)#crypto key generate rsa
- B. SW1(config-line)#transport input sshSW1(config-line)#exitSW1(config)#service password-encryption
- C. SW1(config-line)#exitSW1(config)#aaa new-model
- D. SW1(config-line)#login localSW1(config-line)#exitSW1(config)#enable secret test!2E
Correct Answer: B 🗳️
Explanation: Only visible for TestValid members. You can sign-up / login (it's free).
Siehe die Abbildung.
Welcher Befehl liefert diese Ausgabe?
- A. CDP-Nachbarn anzeigen
- B. show ip route
- C. Benutzeroberfläche anzeigen
- D. show ip interface
Correct Answer: A 🗳️
Explanation: Only visible for TestValid members. You can sign-up / login (it's free).
Die physische Verbindung zwischen den beiden Layer-2-Switches ist hergestellt.
und die Netzwerkverbindung zwischen ihnen muss konfiguriert werden.
I. Konfigurieren Sie einen LACP EtherChannel I und nummerieren Sie ihn mit 44; konfigurieren Sie ihn.
zwischen den Switches SWI und SW2 über die Schnittstellen EthernetO/O und
Ethernet0/1 auf beiden Seiten. Der LACP-Modus muss auf beiden Enden übereinstimmen.
2. Konfigurieren Sie den EtherChannel als Trunk-Link.
3. Konfigurieren Sie die Trunk-Verbindung mit 802.Iq-Tags.
4. Konfigurieren Sie VLAN 'MONITORING' als ungetaggtes VLAN des
EtherChannel.
Richtlinien
Dies ist eine Laboraufgabe, bei der die Aufgaben auf virtuellen Geräten ausgeführt werden.
* Die Aufgaben für diesen Laborpunkt können Sie auf der Registerkarte „Aufgaben“ einsehen.
* Über die Registerkarte Topologie können Sie auf die Gerätekonsole(n) zugreifen und die Aufgaben ausführen.
* Der Konsolenzugriff ist für alle erforderlichen Geräte durch Anklicken des Gerätesymbols oder durch Verwendung der Registerkarte(n) oberhalb des Konsolenfensters möglich.
* Alle notwendigen Vorkonfigurationen wurden angewendet.
* Ändern Sie weder das Aktivierungspasswort noch den Hostnamen für irgendein Gerät.
* Speichern Sie Ihre Konfigurationen im NVRAM, bevor Sie zum nächsten Punkt übergehen.
* Klicken Sie unten auf dem Bildschirm auf „Weiter“, um dieses Laborexperiment abzusenden und zur nächsten Frage zu gelangen.
* Wenn auf „Weiter“ geklickt wird, schließt sich das Labor und kann nicht wieder geöffnet werden.
Correct Answer:
Solution is given below explanation.
Explanation:
To configure an LACP EtherChannel and number it as 44, configure it between switches SW1 and SW2 using interfaces Ethernet0/0 and Ethernet0/1 on both sides, configure the EtherChannel as a trunk link, configure the trunk link with 802.1q tags, and configure VLAN 'MONITORING' as the untagged VLAN of the EtherChannel, you need to follow these steps:
On both SW1 and SW2, enter the global configuration mode by using the configure terminal command.
On both SW1 and SW2, select the two interfaces that will form the EtherChannel by using the interface range ethernet 0/0 - 1 command. This will enter the interface range configuration mode.
On both SW1 and SW2, set the protocol to LACP by using the channel-protocol lacp command.
On both SW1 and SW2, assign the interfaces to an EtherChannel group number 44 by using the channel- group 44 mode active command. This will create a logical interface named Port-channel44 and set the LACP mode to active on both ends. The LACP mode must match on both ends for the EtherChannel to form.
On both SW1 and SW2, exit the interface range configuration mode by using the exit command.
On both SW1 and SW2, enter the Port-channel interface configuration mode by using the interface port- channel 44 command.
On both SW1 and SW2, configure the Port-channel interface as a trunk link by using the switchport mode trunk command.
On both SW1 and SW2, configure the Port-channel interface to use 802.1q tags for VLAN identification by using the switchport trunk encapsulation dot1q command.
On both SW1 and SW2, configure VLAN 'MONITORING' as the untagged VLAN of the Port-channel interface by using the switchport trunk native vlan MONITORING command.
On both SW1 and SW2, exit the Port-channel interface configuration mode by using the exit command.
On both SW1 and SW2, save the configuration to NVRAM by using the copy running-config startup-config command.
Ein Paket von einer Zweigstelle eines Unternehmens ist für den Host 172.31.0.1 am Hauptsitz bestimmt. Der sendende Router hat drei mögliche Einträge in seiner Routingtabelle für das Paket: Präfixe
172.31.0.0/16, 172.31.0.0/24 und 172.31.0.0/25. Wie verarbeitet der Router das Paket?
- A. Es sendet den Datenverkehr über das Präfix 172.31.0.0/16
- B. Es sendet den Datenverkehr über das Präfix 172.31.0.0/24
- C. Es sendet den Datenverkehr über das Präfix 172.31.0.0/25
- D. Der Datenverkehr wird über das Standardgateway 0.0.0.0/0 gesendet.
Correct Answer: C 🗳️
Explanation: Only visible for TestValid members. You can sign-up / login (it's free).
Siehe die Abbildung.
Welche Auswirkungen hat diese Konfiguration?
- A. Die dynamische ARP-Prüfung ist deaktiviert, da die ARP-ACL fehlt.
- B. Der Switch-Port bleibt so lange deaktiviert, bis er so konfiguriert wird, dass er eingehenden Paketen vertraut oder nicht vertraut.
- C. Der Switch-Port bleibt administrativ deaktiviert, bis die Schnittstelle mit einem anderen Switch verbunden wird.
- D. Der Vertrauensstatus der Switch-Port-Schnittstelle wird auf „nicht vertrauenswürdig“ gesetzt.
Correct Answer: D 🗳️
Explanation: Only visible for TestValid members. You can sign-up / login (it's free).
Viewing page 1 out of 251 pages.
Viewing questions 1-5 out of 1255 questions.
